Tips For Replacing a Window Handle
It is simple to change your window handle from the at-home comforts of your home. Follow these guidelines to ensure a smooth and beautiful finish.
Begin by removing the screws to reveal the screws within the uPVC window handle. Measure the spindle to make sure you're getting the correct size replacement.
1. Measure the Spindle length
It's important that you ensure the correct size of the spindle when replacing a window handle. This is because it can determine how tight or loose the handle is, and whether it will lock correctly in the window frame. The spindle is a steel shaft that connects the handle to the lock on the frame of the window. The spindle is either a standard 8mm cross-section in the industry or the earlier 9mm versions. The current industry standard is 8mm however this was not always the case. When buying a new handle it is important to check the dimensions.
Take the handle off. This is done by turning the handle into the open position, then unscrewing two screws that keep the handle in place (which are usually concealed behind plastic caps that are required to be removed). After removing the handle, measure from the base of the handle until the end of the spindle. This will provide you with the measurements you need to purchase a replacement.
There are many options when it comes to selecting a new window handle from sleek chrome that blends in with a modern home, to traditional brass with a burnished finish that looks great in restored Georgian rooms, or even the more quaint Tudor cottages with curled monkey tail locks! upvc door handle are endless, but the most important thing is to choose a style that suits your home.
Espag handles are generally installed to uPVC windows and are identical in size, with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, ranging from 58mm up to 62mm. Cadenza window handles are a different size again because they feature an angled blade which operates with a multi-point locking mechanism within the window.
When selecting a window handle take into consideration the hand you use to open your door. Inline Espag window handles aren't handed and can be utilized on either left or right handed windows. Cranked window handles are handed and are only used on windows that open in one direction.
2. Remove the Handle
A window handle that is sagging is a frustrating experience, regardless of regardless of whether the handle has been damaged or worn out. The good news is that you can replace the uPVC handle by yourself. All you need is the most basic tools and a bit of time to complete the job.
First of all, you need to open the window and ensure that it is in an unlocked position. Then, remove the screw caps that hold the handle in place. Once these caps are removed, you can start to work on removing the handle itself.
The handle itself is fixed to a spindle within the window frame. The handle is fixed by either a screw or pin according to the type of handle. The most common handle types are inline Espagnolette handles and cockspur handles. Both kinds of handles are available on casement windows including aluminium ones. They can be locked by using keys to stop unauthorised opening of the window from the outside or you can lock them by turning the handle clockwise.
To remove the handle, you will need to use an screwdriver with a flat blade in order to release the clip holding the handle. When this clip is released the handle will slide off the spindle. Once the old handle is removed, you'll need measure the spindle length and make sure that your new handle will fit.
Once you have determined the proper size of the handle, screw it in place. It is crucial to ensure that the handle is properly attached and that it is rotating in the correct direction (clockwise if the handle is open or counterclockwise if the handle closes). It is also important to check that it has not been fitted upside down.
Replace the cap screws. Once you have done this, you can test the handle to make sure that it works correctly. You can also test the locking system by shifting the handle from the unlocked position to the locked one and then back.
3. Remove the Screws
A uPVC window handle is a crucial element of any home and is usually the first item to exhibit signs of wear and wear and tear or damage. This could be due to natural factors, regular usage, or even deliberate damage by criminals looking to gain access to your home. However, a simple replacement is a simple solution and stop the problem from happening again.
UPVC handles may also be difficult to open if the locking mechanism isn't functioning properly. Often, the problem is solved by replacing the multipoint lock rather than the entire handle, and it's certainly worth checking this as it can save you money.
Once you've removed the old handle, you'll need to take off the screws that were that held it in place. The screws are typically located on the inside of the handle's base. It is possible to use a screwdriver to do this. Be cautious not to over tighten the handle since this could cause it to become loose.
The next step is to locate the fixing pins or screws that hold the new handle in the correct position. These are likely to be located on the inside face of the base of the handle. you will need to use an screwdriver or a pair of pliers to remove them. If you wish to replace them, you can do so by replacing the caps on the screw and test the handle to ensure it functions correctly.
When you're ready to install the new handle, simply line up the spindle with the cut out in the window mechanism and screw it into place. Make sure that the handle is in the open position and that any screws are secured before replacing the screw covers should you wish to do this. Then you can enjoy the newly installed window handle. Hopefully this will help you to save money on window and door replacements in the future. Contact us if you need more information about this or any aspect of your uPVC window.
4. Fit the New Handle
The process of replacing a broken window handle or updating it is easy and can be accomplished in only a few simple steps. Identifying the type of window handle, measuring its spindle length and knowing the tools you'll require to complete the task are essential. Always consider security when working with windows and tools. It's also important to be patient and follow the steps with care to ensure you have a functioning handle that is safe to use.
The first step is to identify the screws that hold your current window handle in place and take them out, while maintaining an appropriate grip on the handle itself to prevent it from falling suddenly and injuring yourself. Once the screws are removed and repositioned, they can be put in a safe place to be replaced in the future.
After removing the old handle, you can begin to install your new one. The handle should be perfectly positioned for it to function properly and hold the window in its closed position. Then, slide the metal bar that is square on the handle into the hole in the window mechanism.
The final step is to replace the caps on the screws and then test the handle to ensure that it is working. If you aren't satisfied with the results, or if your window does not open and close properly contact our experts for help.
Almost all UK homes are equipped with uPVC Windows. Therefore, a large number of windows will need to be changed at some point due to wear and tear or breakage. Anyone with a bit of DIY knowledge can accomplish the task. It is crucial that the handle you choose matches the dimensions and style of the window. Contact our team if you aren't sure of the kind of handle you need. They will be able assist you with all of the choices.